Bosch LTC 0495/21 Day/Night Camera

The Bosch LTC 0495/21 is a High Performance 1/3-inch Digital CCD Day/Night Camera ensures the highest image quality possible at any time. Depending on the available light the camera will automatically switch from color to monochrome. A unique combination of 15-bit digital video processing that enhances sensitivity and XF-Dynamic which extends the dynamic range provides a sharper, more detailed image with outstanding accuracy in color reproduction. All Dinion cameras are supplied ready to operate. Simply attach and focus the lens, then connect power. No tools are required for back focus and power connection. For especially challenging situations where fine tuning or special settings are required, the camera parameters can be individually set using the control buttons on the side of the camera and On-screen Display (OSD). The camera automatically detects the lens type. The Lens Wizard ensures accurate back-focusing for perfectly sharp pictures at all times.

This camera does not come with lens. Lens must be purchased seperately.

Bosch LTC 0495/21 Day/Night Camera with 15 Bit Digital Signal

The Bosch LTC 0495/21 comes equipped with a highly accurate 15-bit digital signal that is automatically processed to optimally capture the detail in both the high and low light areas of the scene simultaneously, maximizing the information visible in the picture.

Bilinx is a bidirectional communication capability embedded in the video signal of all Bosch Dinion cameras. Technicians can check status, change camera settings and even update firmware from virtually anywhere along the video cable. Bilinx reduces service and installation time, provides for more accurate set-up and adjustment, and improves overall performance. In addition, Bilinx uses the standard video cable to transmit alarm and status messages, providing superior performance without additional installation steps.

The built-in video motion detector allows you to select up to four fully programmable areas with individual thresholds. The global scene change detector minimizes false alarms caused by sudden lighting condition changes, such as switching on or off the indoor or security lighting. When motion is detected alarms may be displayed in the video signal while the output relay can be closed in addition to alarm message transmission on Bilinx.

Bosch LTC 0495/21 Features:

• 15-bit DSP Technology
• High sensitivity
• Mechanically switching IR filter for IR sensitivity at night
• XF-Dynamic for unsurpassed wide dynamic range
• Bilinx Communication for remote set-up and control
• Default Shutter eliminates motion blurring
• Four area video motion detection
• 540 TVL resolution

Bosch LTC 0495/21 Specifications:

CCD Type	1/3" Interline
Active Pixels	PAL: 752 (H) x 582 (V) / NTSC: 768 (H) x 492 (V)
Horizontal Resolution	540 TV Lines
S / N Ratio	> 50 dB
Sensitivity	2.4 Lux
Minimum Illumination	0.24 Lux
Electronic Shutter	Auto (1/60 (1/50) to 1/500000), fixed, flickerless, default
Video Output	1 Vpp, 75 ohm
Range	32x Dynamic Range Enhancement
Dynamic Noise Reduction	Auto, OFF selectable
Contour	Sharpness enhancement level selectable
BLC	Off, Area and Level selectable
Gain	Auto (maximum level selectable to 28 dB) or fixed level selectable
Lens Mount	CS (max lens protrusion 5mm, 0.2 inch)
Dimensions	59 (H) x 67 (W) x 122 mm (D)
Controls	OSD with soft key operation
Operating Temperature	-20�C to +50�C (-4�F to 122�F)
Storage Temperature	-25�C to +70�C (-13�F to +158�F)
Operating Humidity	20% to 93% RH