4XEM IPCAMW80 IP Network Camera

4XEM's W80 wired IP Network Camera features a 1/3" CCD Image Sensor, MPEG 4 video compression, Generic I/O Ports (1 input, 1 output), and a sensitive microphone. Connections are also available for an external microphone and for audio output, enabling two-way audio communication. This IP Network Camera is ideal for applications that require two-way audio such as audio surveillance, reception points, remote instruction and simple video conferencing.

4XEM IPCAMW80 IP Network Camera with BNC Connector for Connection to CCTV System

The IPCAMW80 camera is Dual Codec allowing for either MPEG4 or MJPEG selection and comes with a BNC connector for connection to a CCTV system. Optional accessories include an Infra Red Lens allowing full darkness monitoring/recording or a Variable Focus Lens for distance monitoring.

The motion detection feature will trigger still image capture and send the image via e-mail or to an FTP location. Bundled software allows monitoring and control of up to 16 IP Cameras from any web browser, and the quick and simple installation means you will be up in minutes viewing streamed video.

4XEM IPCAMW80 Features

• Compact TCP/IP network remote video/audio surveillance system
• Light sensitivity down to 0.5 lux
• Built-in web server
• 1 input and 1 output for connecting external devices such as alarms, door sensors and relays - Use to activate light or close doors, or activation of camera recording
• Pre/Post alarm snapshots with buffering allowing recording of two minutes prior to motion detection
• Supports Dual Codec allowing selection of Motion JPEG or MPEG4, allowing systems to be optimized for image quality or bandwidth efficiency
• Adjustable image size, quality and bit-rate
• Bundled with free recording and monitoring PC or Server software
• Built-in intelligent motion detection
• Customizable homepage
• Direct control of Digital Output
• Two-way audio support using built-in or external microphone
• Video loop through output for connection to existing CCTV systems
• Ceiling or wall mountable with included steel mounting bracket

4XEM IPCAMW80 Specifications

Video Source	Embedded CCD
Image Sensor	1/3 inch color CCD image sensor
Lens Type	6 mm F2.0 Standard CS Mount Type
CCD Resolution	510(H) X 492(V) NTSC
Minimum Illumination	0.5 Lux / F2.0 (Standard); 0 Lux 10 meters with IR Lens (Sold Separately)
Electronic Shutter Speed	1/60 ~ 1/100,000 second NTSC
Automatic Electronic Shutter (AES)	Supported
Automatic Gain Control (AGC)	Supported
Automatic White Balancing (AWB)	Supported
Auto-Iris Support	Supports Auto Iris devices
Dimensions	140.0 mm Length
	70.0 mm Width
	55.0 mm Height
Weight	Net 430g

Suggested Accessories

• 4XEM Power Over Ethernet (POE) Splitter (4XEM Part # IPCAMPOESPLIT)
• 4XEM MIMF1228 Fixed 2.8mm Focal Manual Iris Lens (4XEM Part # MIMF1228)
• 4XEM AIVF18550 5-50mm Vari-Focal Lens with Auto Iris Connector (4XEM Part # AIVF18550 )
• 4XEM IRLENS Infrared Lens for Recording in Complete Darkness - For Indoor Use (4XEM Part # IRLENS)
• 4XEM AIVF14 3.5-8mm Vari-Focal Lens with Auto Iris Connector (4XEM Part # AIVF14)
• 4XEM Protective Camera Enclosure with Heater and Fan (4XEM Part # IPCAMENCLOHF)
• 4XEM Protective Camera Enclosure with Fan (4XEM Part # IPCAMENCLOF)
• 4XEM Protective Camera Enclosure with Heater (4XEM Part # IPCAMENCLOH)
• 4XEM IP66 Rated Industrial Grade Protective Outdoor Network Camera Enclosure (4XEM Part # IPCAMENCLO)
• EPOEMS12 12 Port MidSpan POE Hub (4XEM Part # EPOEMS12)